The Renogy 400W Solar Starter Kit is easy for you to install, and it is the most economical choice for solar beginners. This Renogy Solar Kit includes the equipment necessary for building a new system: a solar panel, a charge controller, needed electrical wiring, Solar Y Branch Connectors and Z-brackets, making it an ideal choice for both off-grid and mobile solar power applications.
This Starter Kit will produce an average of 2kWh of electricity per day (Based on 5 hours of direct sunlight conditions). The 100W solar panel doesn't take up much roof space, but its energy can offset small and medium-size loads such as lighting, television, and coffee maker.
The Starter Kit can build a reliable and environmentally friendly power supply, perfect for RVs, campers, boats, sheds, and cabins. It can also be installed as a power supply for outdoor appliances and emergencies, and as a stand-alone power system.
The bypass diode can ensure the panel has an excellent performance in a low-light environment and the TPT back sheet dissipates excess heat to ensure smooth output performance. The Cell Efficiency can reach 22%.
The Wanderer PWM charge controller features advanced 4-stage charging (bulk, boost, float, and equalization) to ensure your battery is efficiently and safely charged to 100%.
The Wanderer PWM Charge Controller is compatible with four different types of batteries: Sealed, Gel, Flooded, and Lithium batteries. Connecting the BT-1 Bluetooth module to the RS232 communication port, you can monitor the system status in real-time through the DC Home app.
Please note the BT1 Bluetooth Module is not included.
The corrosion-resistant aluminum frame with strong corner braces is designed for long-term outdoor use, giving the panels a long service life.
The IP65 Junction Box protects against environmental particles and low-pressure water jets. These IP67 waterproof solar connectors ensure that the water and dust will not enter the connector during extended outdoor use. Effectively preventing water from seeping in.
This Renogy Solar Kit includes the equipment necessary for building a new system. The necessary cables, Z-brackets, Solar Y Branch Connectors and pre-drilled holes on the back frame of the panel allow fast and secure mounting.
Package Includes
| 100W Monocrystalline Solar Panel | |
|---|---|
| Maximum Power: 100W | Operating Temperature: '-40°F to 185°F(-40℃ to +85℃) |
| Open-Circuit Voltage (Voc): 22.3V | Short-Circuit Current (Isc): 5.86A |
| Optimum Operating Voltage (Vmp): 18.6V | Optimum Operating Current (Imp): 5.38A |
| Dimensions: 41.8 x 20.9 x 1.38 in | Weight: 14.3 lbs / 6.5 kg |
| Solar Y Branch Connectors | Mounting Z Brackets (Set) |
|---|---|
| Withstanding Voltage: 1000V DC(TUV), 600V(UL) | Eight Long Cap Bolts and Four Short Bolts |
| Protection Degree: IP67, mated | Four Spring Washers and Four Washers |
| Wiring Size Range: 10, 12, 14 AWG | Four Z Shape Solar Panel Brackets |
| Temperature: -40°F to +195°F | Four Nuts |
| Solar Panel to Charge Controller Adaptor Kit(Set) | Battery to Charge Controller Tray Cables(A pair) |
|---|---|
| Length: 20ft | Length: 8ft |
| AWG: 10 | AWG: 10 |
| Rating Voltage: 600/1000V | Rating Voltage: 600/1000V |
| Temperature: -40°F to +185°F | Temperature: -40°F to +185°F |
| Wanderer Li 30A PWM Charge Controller | 2000W 12V Pure Sine Wave Inverter |
|---|---|
| Nominal Voltage: 12 VDC | Continuous Output Power: 2000W |
| Rated Charge Current: 30A | Nominal Input Battery Voltage: 12V |
| Max. PV Input Voltage: 25 VDC | Output Voltage: 115V |
| Max. PV Input Power: 400W (12V) | Battery Terminal Size: M8 |
| 12V 100Ah Core Lithium Iron Phosphate Battery | |
|---|---|
| Rated Capacity (0.5C, 25°C): 100 Ah |
Dimension: 10.6 x 6.9 x 8.6 in / 260 x 169 x 211 mm |
| Nominal Voltage: 12.8 V |
Weight: 23.15 lbs / 10.5 kg |
| Energy: 1280Wh |
Terminal Bolt Size: M8 x 1.25 x 15 mm |
| Cycle Life(0.5C/1C, 25℃): 5000 Cycles (80% DOD 80% EOL) | Protection Rating: IP65 |
Warranty Information
| Panels |
25-year power output warranty: 5 year 95% efficiency rate, 10 year 90% efficiency rate, 25 year 80% efficiency rate 10-year material and workmanship warranty |
| Accessories | 1-year material and workmanship warranty |
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
 |
|||
 |
|||
| Please click the links below to download the materials: | |||
| 30A PWM Wanderer Li Charge Controller | |||
| MOUNTING Z BRACKETS (SET) | |||
