Smart Energy Storage kit 100W Flexible Solar Panel + 50A MPPT battery charger kit

Smart Energy Storage kit 100W Flexible Solar Panel + 50A MPPT battery charger kit
starts- reviews
CAD $1,589.99 CAD $1,225.99
Calculater  reward Renogy Rays


CA stock, usually ships in 1 to 3 business days.



Giving you ultimate charging flexibility, the new dual battery charging solar bundle is the smart way to stay off the grid longer. This 12V 50A dual battery solution not only charges your house battery bank and trickle charges your starter battery bank while on the move, but thanks to the MPPT solar input, you can also charge while parked. If you need more power, you can expand up to 660W of solar input giving you plenty of options.
And the kit is equipped with 12V 100AH SMART LITHIUM IRON PHOSPHATE BATTERY for you, now you can start your trip.

If you have any questions regarding this product; please submit a case.


Key Features

Efficient System
  • High efficiency solar cells. (21% Monocrystalline Cell Efficiency, 15% Module Efficiency)
Extremely Flexible
  • This 100W solar panel can flex up to 248 degrees, minimizing the mounting and even issues for a curved surface. Where rigid panels are inconvenient to install, get this one.
Ultra Lightweight
  • Light as 4.2 pounds, this product weighs 1/4 of its rigid counterpart. Travel light with solar, embrace possibilities.
Super Thin Lamination
  • This Renogy 100W flexible panel is only 0.08 inches thick! It is about 95% thinner than its rigid counterpart, ideal for a stealthy solar setup.
Weather Resistance
  • Rigorously tested, the 100W panel can withstand extreme winds of up to 2400 Pa and snow loads of up to 5400 Pa. Fearless of extreme climates, backup your brave journey.
Easy Installation
  • Six metal reinforced mounting holes, simple to install. You can also mount it with silicone structural adhesive.
Smart Function
  • 【3-phase MPPT Charging Technology】 With Built-in Maximum Power Point Tracking (MPPT), Renogy DC-DC On-Board Battery Charger will charge your service batteries with maximized solar power, providing 3-phase charging (Bulk, Boost and Float) to regulate the whole charging and ensure the batteries will be accurately charged at the correct voltage levels to 100%.
Safe Operation-Multiple Protections
  • Renogy DC-DC On-Board Battery Charger has multiple intelligent protections includes battery isolation, over-voltage protection, battery temperature protection, over-current protection, overheat protection, reverse current protection, solar panel and alternator reverse polarity protection, guaranteeing charging safety and protecting you batteries.

    Pre-drilled holes on the back frame for fast and secure mounting.

  • Connects multiple batteries in parallel safely without internal state non-uniformity issues.
  • Ultra-Safety.
  • The battery management system (BMS) provides comprehensive protection to the battery and manages the charging/discharging process wisely.
  • Uncompromised Quality.
  • State-of-the-art battery cells ensure a lifespan of more than 4000 cycles, 100A continuous discharge current, and a wide range of operation temperature.
  • Communication Port
  • The RJ45 communication ports enable data transmission to meet the needs of different usage scenarios.


Package Includes


100 Watt 12 Volt Flexible Monocrystalline Solar Panel

1 x

50A 12V dcc50s DC-DC On-Board Battery Charger with MPPT

1 x


Solar Adaptor Kit (Connecting Solar Panels To Charge Controller)

1 x


                                 Battery to Charge Controller Tray Cables for 3/8 in Lugs

1 x


MC4 Waterproof In-Line Fuse Holder w/ Fuse 10A

1 x


60A ANL Fuse Set w/ Fuse

1 x


100Ah 12 Volt Smart Lithium-Iron Phosphate Battery

1 x

100 Watt 12 Volt Flexible Monocrystalline Solar Panel DCC50S 12V 50A DC-DC On-Board Battery Charger with MPPT
Max Power at STC: 100W System Voltage: 12VDC
Open Circuit Voltage (VOC): 22.5V Battery voltage Range: 9-16VDC
Short Circuit Current (ISC): 5.75A Maximum Charging Current: 50A
Optimum Operating Voltage (VMP): 18.9V Battery Types: SLD/AGM, GEL, FLD, LISER
Optimum Operating Current (IMP): 5.29A Service Battery Charging Mode: MPPT
Operating Temperature:: -40 to +85°C Charging Efficiency: Up to 97%
Dimensions:: 48.0x21.6x0.08in(1219x546x2mm) Max. Solar Input Voltage: 25V
Weight:: 4.2lbs(1.9kg) Max. Solar Input Power: 660W
Optimum Operating Current (IMP): 5.29A Alternator Input Voltage: Traditional Alternator: 13.2-16VDC
Smart Alternator (Euro 6): 12-16VDC
Operating Temperature:: -40 to +85°C Max. Alternator Input Power: 660W
Dimensions:: 48.0x21.6x0.08in(1219x546x2mm) Self-consumption: 60mA
Weight:: 4.2lbs(1.9kg)  
RENOGY 8FT 4AWG TRAY CABLES (PAIR) Mechanical Specifications
Size : 4AWG 8ft Ground Type: Negative
Rating Voltage: : 600/1000V Terminal Size: M8*1.25 - 10mm
Operating Temperature: -40°F to +185°F Temperature Compensation: -3mV/C/2V
10A Solar Connector Waterproof In-Line Fuse Holder w/ Fuse Operating Temperature Range: -31°F - 149°F
Current Rating: 10A Storage Temperature Range: -40°F - 176°F
Degree of Protection: IP2*/IP67 Operating / Storage Humidity: 0%-95%, No Condensation
Rated Voltage: 1000 V DC Dimensions: 9.6*5.7*3.0in
Test Voltage: 6000V (50Hz,1 min) Weight: 3.13Ibs
Contact Material: Copper, Silver Plated Communication Protocol: RS485
Temperature Range: -40 to +125°C Renogy 20ft 10AWG Solar Adaptor Kit (SET)
  Size: 10AWG 20ft
  Rating Voltage::  600/1000V
  Operating Temperature: -40°F to +185°F
Rated Capacity: 100 Ah Storage Temperature: -13~149℉ / -25~65℃
Nominal Voltage: 12.8 V Insulation Resistance: 500V DC, ≥ 10 MΩ
Voltage Range: 10~14.8 V Dimensions: 11.4 x 6.8 x 7.4 inch / 289 x 172 x 187.5 mm
Maximum Continuous Charging Current: 50 A Weight: 26 lbs. / 11.8 kg
Maximum Continuous Discharging Current: 100 A Protection Rate: IP54
Charge Temperature: 32~131°F/ 0~55°C Communication Port: RJ45 (RS485 Protocol)
Discharge Temperature: -4~140°F/ -20~60°C Connection Method: Parallel
60A/100A ANL Fuse Set w/ Fuse Accessories
Current Rating: 60A see package includes tab
Voltage Rating: 72V  
Interrupt Capacity: 120A  
Battery UN38.3
UL 1642 (Battery Cell)
Battery Charger CE and RoHS compliant
FCC Class B Part 15 Compliant
Panel ISO

Warranty Information


25-year power output warranty:
5 year 95% output warranty
10 year 90% output warranty
25 year 80% output warranty

5-year material and workmanship warranty

Accessories 1-year material and workmanship warranty
Battery Material and workmanship warranty---5 Year
Battery Charger Material and workmanship warranty----2 Year
1.What do I need to complete my off-grid solar power system ?
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
2. What does off-grid and on-grid mean ?
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts. 
3. Why is my solar panel under producing ? 
Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output.
4. How should I connect solar panels in my electrical circuit (series vs parallel)
Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while system current output will be the same as that for one panel. While, connecting solar panels in parallel will have a different effect; individual panels operating current output will add up to be the system output current, while system output voltage will be the same as the output voltage of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections. 
5. How many solar panels do I need ?
The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
More questions about your off-grid power system? Learn more from Renogy Learning Center!

No Reviews Write a Review